LEAFBOND

TargetLock 3Z is a uniquely formulated low-use rate adjuvant developed for both aerial and ground applications.
WHY USE IT?
TargetLock 3Z aids the applicator in getting more of your pesticide spray “ON-TARGET”. It increases pesticide deposition and reduces drift potential with the built-in DRA (drift mitigation agent).
APPLICATION: Aerial fungicide applications with both airplanes and helicopters
RATE: 4 oz./A.

A “Triple” blend of water conditioning salts and nonionic surfactant formulated with a concentrated drift reduction/deposition agent.
WHY USE IT?
TripleBond 2Q adds convenience by reducing the number of products added to your spray tank. It optimizes herbicide performance by preventing hard water mineral antagonism of spray mixtures, reducing the production of small droplets that are susceptible to drift off-target, and improving the deposition of droplets on the leaf surface.
APPLICATION:

• Post applied for herbicide passes where drift control is important.
• Approved for use with Enlist herbicide mixes.

RATE: 2 qt/100 gallons of water (0.5%v/v)

Inferno 2Q is a non-ionic blend of surfactants and methylated seed oil (60/40 MSO) designed for use with a broad range of pesticides where an MSO is required.
WHY USE IT?
Inferno 2Q increases contact activity and penetration of the spray while providing uniform coverage on leaf surfaces. It “HEATS UP” burndown mixes for maximum heat and burndown effectiveness. Inferno 2Q will maximize burndown effectiveness when outside temperatures are cold and/or weed density is high.
APPLICATION: Burndown herbicide mixes
RATE: 2 qt/100 gallons of water (0.5%v/v)

Igniter 2Q is a high-load 60/40 crop oil. It is designed for use with a broad range of pesticides where a crop oil concentrate adjuvant is required or recommended.
WHY USE IT?
For burndown applications, Igniter 2Q aids in providing a quicker and more thorough burndown of weeds, IGNITING your burndown herbicide mixes. For in-crop applications, Igniter 2Q improves spray deposition in the canopy and enhances both spray coverage on leaf surfaces and penetration of the spray through the leaf cuticle, reducing evaporation.
APPLICATION: Burndown herbicide mixes and in-crop herbicide mixes where a crop oil concentrate is recommended.
RATE: 2 qt/100 gallons of water (0.5%v/v)

TripleRinse 1Q is a premium tank cleaner to ensure the safe removal of pesticides in both the spray tank and spray system, including lines and nozzles.
WHY USE IT?
Removing all pesticide residue prior to switching to mixtures that would negatively affect a susceptible crop is critically important to the health of your crop. Flushing both your spray tank and sprayer system with only water or with inferior tank cleaners increases your risk of crop injury. When following the recommended “Triple Rinse” procedure, TripleRinse 1Q provides peace of mind that your transition to the next pesticide program will come at no additional cost from crop injury.
RATE: 1 qt/100 gallons of water (0.25%v/v)

NanoBond 4Z™ is a low-use rate nanoparticle to be added directly into liquid fertilizers, herbicides, fungicides, and insecticides.
WHY USE IT?
NanoBond 4Z™ enables better uptake of active ingredients. This leads to enhanced control, faster visible results, and improved yields. In some formulations, such as foliar nutritional products, it allows for use rates to be cut in half due to the improved active ingredient uptake.
APPLICATION: NanoBond 4Z™ is unlike anything we’ve used before in agriculture and, therefore, requires a different mixing methodology for use. NanoBond 4Z™ should be mixed directly into the product that you desire to enhance the performance of. It is not listed in a specific mixing order because it should not be mixed into a tank mix. It should be mixed “directly” into the ingredient itself. Example: Mix the recommended rate directly into a tote of fungicide or a tank of 28%.
RATE:4-6 oz./A

FieldLock 5Q is a four-way blend of water conditioning salts and nonionic surfactant formulated with a concentrated drift reduction/deposition agent and a volatility reduction agent.
WHY USE IT?
FieldLock 5Q provides the ultimate in convenience for Xtendimax and Engenia applications on Xtend and XtendFlex crops. The four-way blend reduces the number of products added to your spray tank while meeting all requirements for application over the top of Xtend/XtendFlex soybeans. It optimizes herbicide performance by preventing hard water mineral antagonism of spray mixtures, reducing production of small droplets that are susceptible to drift off-target, and improving deposition of droplets on the leaf surface, while at the same time, “LOCKING” the product in the applied field with the added VRA.
APPLICATION: Post-applied herbicide passes with approved dicamba formulations in the Xtend or Xtendflex soybean herbicide systems.
RATE: 5 qt/100 gallons of water (1.25%v/v)

LeafLock 1Q is a premium 90% non-ionic surfactant (NIS) and can be used with a broad range of pesticides where a NIS is recommended.
WHY USE IT?
LeafLock 1Q improves the effectiveness of herbicides, insecticides, and fungicides by helping to “LOCK” the spray on leaf surfaces, providing more uniform distribution and better wetting of the plant surface.
APPLICATION: Post-applied herbicide mixes in corn, soybeans, and wheat.
RATE: 1 qt/100 gallons of water (0.25% v/v)

WaterSoft 1Q is a low-use rate liquid water conditioner.
WHY USE IT?
WaterSoft 1Q complexes with hard water salts such as calcium, magnesium, and manganese to prevent them from complexing with glyphosate and other weak acid herbicides like dicamba and 2,4-D. This minimizes hard water’s negative activity on herbicide uptake.
APPLICATION: Tank mixes containing glyphosate products or other products that require a water conditioner. Replaces dry AMS for those who prefer liquid.
RATE: 1 qt/100 gallons of water (0.25% v/v)

CobSafe 1Q is a uniquely formulated alkylphenol ethoxylate (APE) free surfactant-based adjuvant developed to increase deposition and reduce drift potential.
WHY USE IT?
CobSafe 1Q will not cause arrested ear syndrome in corn because it is APE free.
APPLICATION: Pre-tassel fungicide and/or herbicide applications in corn.
RATE:1 qt./100 gallons of water (0.25% v/v)

DriftLock 2Q is a drift control, deposition aid, and foliar retention adjuvant.
WHY USE IT?
When additional drift control is needed in ground applications, without additional surfactant load, DriftLock 2Q provides an easy-to-use solution with a low use rate.
APPLICATION: Post applied herbicides when environmental conditions are sub-optimal.
RATE: 2 qt./100 gallons of water (0.5% v/v)